2545S Triplex Plunger Pump

2545 S三柱塞曲轴泵 

   The Hypro 2545S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 47 gpm (177 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by cold start-ups and intermittent operation.

   2545 S三柱塞曲轴泵为经久耐用，卓越表现和方便维护目的专门设计。最高可达到47 gpm 流量(177 升/分钟)和 1200 psi (83 bar)压力。316不锈钢两段式泵头结构最大程度降低腐蚀和开裂。包括特大号曲轴，密封和连杆在内的箱体轻松应对突然启动及断续性使用等毁坏性应用。

   Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability

   由工业领域最好的保修服务作为支撑， hypro 泵为洗车业，市政冲洗车等行业提供高效，稳定的高压泵专业设计，

Performance Information

技术参数：

• Max. flow: 47 gpm/177 lpm

  最大流量：47 加仑/分钟，177升/分钟

• Max. pressure: 1200 psi/83 bar

  最大压力：1200 psi/83 bar

• Max. rated speed: 800 rpm

  泵最大转速：800 转/分钟

· Other Attributes

   其它参数 

 • Ports: 1-1/2" inlet, 1" outlet

   接口：1-1/2"进水口径，1"出水口径 

 • Shaft: 35mm OD solid thru shaft for left- or right-hand operation

   输入轴：35mm 实心轴，方向可左右互调

 • Head and manifold material: 316 stainless steel head and two-piece manifold resist washout and corrosion

   泵头和多级连接材料：316不锈钢和两段式泵体抵抗生锈和开裂

 • Oversized crankshaft, bearings and bronze connecting rod can handle the abuse of cold start-ups and intermittent operation

   特大号曲轴，密封和紫铜连杆轻松应对突然启动及断续性使用

 • Plunger rod: Stepped plunger rod between plunger guide and oil seal eliminates seal failure due to plunger rod wear

  柱塞杆：曲轴连杆和油封间分段式柱塞杆消除柱塞杆磨损导致的密封泄露

 • V-packings: Self-adjusting, spring-loaded, double V-packings maintain constant high pressure seal compression and extend seal and plunger life

   v-密封：自动调节，弹簧底座，双层V-密封维持高压密封和延长密封与柱塞寿命

 • Easily replaces Cat 3545

   完全替代CAT 3545型号泵 

 • Shown with optional mounting kit (Part # 3430-0645) 

 • Weight: 141 lbs./64.0 kg

   重量：64kg